據烴加工網站12月15日報道，霍尼韋爾宣布與得克薩斯大學奧斯汀分校（UT Austin）達成一項協議，實現以較低成本捕獲發電廠和重工業排放的二氧化碳。

霍尼韋爾將利用得克薩斯大學奧斯汀分校專有的先進溶劑技術開發針對電力、鋼鐵和水泥等工廠的碳捕獲新解決方案，以降低新設備或現有設備中燃燒煙氣產生的碳排放。該解決方案為這些部門提供了有效手段，幫助其滿足監管要求和可持續發展目標。

霍尼韋爾已承諾到 2035 年在其運營的設施中實現碳中和。

與得克薩斯大學奧斯汀分校的許可協議擴展了霍尼韋爾領先的碳捕集技術組合。霍尼韋爾通過其專業的碳解決方案，已經捕獲1500萬噸/年二氧化碳，將其存儲或進行利用。霍尼韋爾稱，公司有能力通過其在全球實施的項目捕獲 4000萬噸/年二氧化碳。

得克薩斯大學奧斯汀分校的專利解決方案采用先進溶劑，小規模設備，可以在低成本投入的情況下，高效捕獲二氧化碳。對于典型的發電廠（650 MW 容量），使用該溶劑碳捕集技術每年可捕集約340噸二氧化碳，相當于每年從道路上移除近735,000輛汽車。

該二氧化碳捕獲技術可用于現有設備或新建設備。在該過程中，二氧化碳被吸收到胺溶劑中，然后被送到汽提塔，實現二氧化碳與溶劑分離，分離出的二氧化碳經壓縮后封存地下或使用。

據國際能源署稱，2020年，全球 CCUS 項目捕獲和儲存/使用的二氧化碳為 4000噸。為了與 IEA 可持續發展愿景保持一致，即：將全球溫度上升限制在 1.65℃以下，CCUS 項目容量必須增加 20 倍以上，即到2030 年需要捕獲 84000噸二氧化碳。  

賈麗 編譯自 烴加工

原文如下：

Honeywell, University of Texas to collaborate on new CCS technology

Honeywell announced an agreement with The University of Texas at Austin that will enable the lower-cost capture of CO2 emissions from power plants and heavy industry.

Honeywell will leverage UT Austin's proprietary advanced solvent technology to create a new offering targeted at power, steel, cement and other industrial plants to lower emissions generated from combustion flue gases in new or existing units. The solution provides these sectors with an additional tool to help meet regulatory requirements and sustainability goals.

Honeywell has committed to achieve carbon neutrality in its operations and facilities by 2035. 

The licensing arrangement with UT Austin expands Honeywell's leading carbon capture technology portfolio. Today, 15 MMtpy of CO2 is being captured and used in storage/utilization applications through Honeywell's CO2 Solutions process expertise. Honeywell currently has the capacity to capture 40 MMtpy through its installed projects worldwide.

UT Austin's patented solution utilizes an advanced solvent, which enables CO2 to be captured at a lower cost through greater efficiency using smaller equipment. For a typical power plant (650 MW capacity), applying advanced solvent carbon-capture technology would enable the capture of about 3.4 MM tons of CO2 annually, equivalent to removing nearly 735,000 cars from the road each year.

This CO2 removal technology can be retrofitted within existing plants or included as part of a new installation. In this process, CO2 is absorbed into an amine solvent and then sent to a stripper where CO2 is separated from the solvent. This CO2 is then compressed for geological sequestration or used for other purposes. 

In 2020, CCUS projects worldwide were capturing and storing/using 40 MM metric tpy of CO2, according to the International Energy Agency (IEA). In order to align with the IEA Sustainable Development Scenario, which demonstrates a pathway to limit global temperature rise by less than 1.65o C, CCUS project capacity must increase more than 20 times to enable capture of 840 MM metric tpy of CO2 by 2030.

免責聲明：本網轉載自其它媒體的文章，目的在于弘揚石化精神，傳遞更多石化信息，并不代表本網贊同其觀點和對其真實性負責，在此我們謹向原作者和原媒體致以敬意。如果您認為本站文章侵犯了您的版權，請與我們聯系，我們將第一時間刪除。